Nessun prodotto
BLOG NEWS
USARE UN DISPLAY LCD 16x2 CON LA IOT PROTO SHIELD PLUS 
Cosa ne pensa Paolo Aliverti della IoT Proto Shield Plus? 
USARE UN DISPLAY OLED SSD1306 128X64 CON LA IOT PROTO SHIELD PLUS 
USARE UN DISPLAY OLED SSD1306 128x64 CON LA IoT PROTO SHIELD PLUS 
Il Bus I2C sulla IoT Proto Shield Plus Search on blog
Follow us on facebook
I più venduti
-
Proto Shield Plus STARTER KIT
Questo kit è rivolto principalmente a chi desidera iniziare a...
69,90 € -
Proto Shield Plus LCD KIT
La scheda PROTO SHIELD PLUS rende comodo ed immediato sperimentare e...
56,00 € -
Adattatore da SMD a piastra sperimentale (confezione 10pz)
Adatta facilmente componenti SMD a piastra sperimentale (breadboard) con...
3,90 € -
Proto Shield Plus KIT BASE
La scheda PROTOSHIELD PLUS rende comodo ed immediato sperimentare e...
52,00 €
Using additional shields with the Proto Shield Plus
Published : 15/06/2018 12:21:17
Categories : Proto Shield Plus
USING ADDITIONAL SHIELDs with the PROTO SHIELD PLUS
Additional shields can be plugged into the UNO / LEONARDO socket.
Just check the pins used by the shield in order to avoid conflict with pins used by the Proto Shield Plus.
i.e.
If you are going to use a shield that use A0, you will probably need to open SJA0 in order to disconnect the Proto Shield Plus Pushbuttons from A0 pin.
Summary of pins used by the Protoshield Plus :
A0 = used for pushbuttons
A1 = used for POT
D11 = used for Red LED
D12 = used for Green LED
D3* = used for SERVO
Notes:
* not to be considered if the SERVO is not connected
In the next article we will see how to use additional shields with Arduino NANO (and MICRO)
The Proto Shield Plus Board Layout
Read more
Published : 09/03/2018 10:45:38
Using the Proto Shield Plus with Arduino UNO, LEONARDO, YÚN, NANO and MICRO
Read more
Published : 16/03/2018 09:15:13
Prototyping your own shields with 2.54 pitch PCB breadboards
Read more
Published : 06/06/2018 10:48:35
Using additional shields with Arduino NANO and MICRO
Read more
Published : 22/06/2018 11:00:56
