Nessun prodotto
BLOG NEWS
USARE UN DISPLAY LCD 16x2 CON LA IOT PROTO SHIELD PLUS 
Cosa ne pensa Paolo Aliverti della IoT Proto Shield Plus? 
USARE UN DISPLAY OLED SSD1306 128X64 CON LA IOT PROTO SHIELD PLUS 
USARE UN DISPLAY OLED SSD1306 128x64 CON LA IoT PROTO SHIELD PLUS 
Il Bus I2C sulla IoT Proto Shield Plus Search on blog
Follow us on facebook
I più venduti
-
Proto Shield Plus STARTER KIT
Questo kit è rivolto principalmente a chi desidera iniziare a...
69,90 € -
Proto Shield Plus LCD KIT
La scheda PROTO SHIELD PLUS rende comodo ed immediato sperimentare e...
56,00 € -
Adattatore da SMD a piastra sperimentale (confezione 10pz)
Adatta facilmente componenti SMD a piastra sperimentale (breadboard) con...
3,90 € -
Proto Shield Plus KIT BASE
La scheda PROTOSHIELD PLUS rende comodo ed immediato sperimentare e...
52,00 €
Using the Proto Shield Plus pushbuttons with digital inputs
Published : 20/04/2018 10:47:04
Categories : Proto Shield Plus
Using the PUSHBUTTONS with digital input pins
If your application needs (or you prefer) to have pushbuttons connected to the digital input pins, in a few steps the Proto Shield Plus can be configured to satisfy this need too.
Referring to the figure below, cut SJA0, SJABTN, SJBBTN, SJCBTN, SJDBTN and SJEBTN in the middle to disconnect the PUSHBUTTONS form A0 input pin.
Connect BTN A, B, C, D and E pads to your desired digital pins.
While coding your Arduino sketch just remember to configure the internal pullup (pinMode(pinNumber,INPUT_PULLUP)).
The Proto Shield Plus Board Layout
Read more
Published : 09/03/2018 10:45:38
Using the Proto Shield Plus pushbuttons with analog input
Read more
Published : 12/04/2018 09:21:09
