Nessun prodotto
BLOG NEWS
USARE UN DISPLAY LCD 16x2 CON LA IOT PROTO SHIELD PLUS 
Cosa ne pensa Paolo Aliverti della IoT Proto Shield Plus? 
USARE UN DISPLAY OLED SSD1306 128X64 CON LA IOT PROTO SHIELD PLUS 
USARE UN DISPLAY OLED SSD1306 128x64 CON LA IoT PROTO SHIELD PLUS 
Il Bus I2C sulla IoT Proto Shield Plus Search on blog
Follow us on facebook
I più venduti
-
Proto Shield Plus STARTER KIT
Questo kit è rivolto principalmente a chi desidera iniziare a...
69,90 € -
Proto Shield Plus LCD KIT
La scheda PROTO SHIELD PLUS rende comodo ed immediato sperimentare e...
56,00 € -
Adattatore da SMD a piastra sperimentale (confezione 10pz)
Adatta facilmente componenti SMD a piastra sperimentale (breadboard) con...
3,90 € -
Proto Shield Plus KIT BASE
La scheda PROTOSHIELD PLUS rende comodo ed immediato sperimentare e...
52,00 €
Using additional shields with Arduino NANO and MICRO
Published : 22/06/2018 11:00:56
Categories : Proto Shield Plus
Using additional shields with Arduino NANO and MICRO
The ICSP connector allows you to connect an Arduino NANO to the Proto Shield Plus and let it work with a standard shield.
The 6 wires flat cable and the 2x3 2,54mm pins male header are used as an example.
They are not provided with the Proto Shield Plus.
Routing of signals on UNO and NANO boards differs from LEONARDO and MICRO boards.
These differences in some cases make some shields not compatible with LEONARDO and MICRO boards (usually it happens when ICSP and SCL and SDA pins are used to communicate with the shield).
If you are planning to use a shields with LEONARDO or MICRO boards, please check on Arduino / Genuino official documentation about compatibility.
In some cases, rerouting is needed to ensure properly behavior of the shields.
The Proto Shield Plus Board Layout
Read more
Published : 09/03/2018 10:45:38
Prototyping your own shields with 2.54 pitch PCB breadboards
Read more
Published : 06/06/2018 10:48:35
Using additional shields with the Proto Shield Plus
Read more
Published : 15/06/2018 12:21:17
