Nessun prodotto
BLOG NEWS
USARE UN DISPLAY LCD 16x2 CON LA IOT PROTO SHIELD PLUS 
Cosa ne pensa Paolo Aliverti della IoT Proto Shield Plus? 
USARE UN DISPLAY OLED SSD1306 128X64 CON LA IOT PROTO SHIELD PLUS 
USARE UN DISPLAY OLED SSD1306 128x64 CON LA IoT PROTO SHIELD PLUS 
Il Bus I2C sulla IoT Proto Shield Plus Search on blog
Follow us on facebook
I più venduti
-
Proto Shield Plus STARTER KIT
Questo kit è rivolto principalmente a chi desidera iniziare a...
69,90 € -
Proto Shield Plus LCD KIT
La scheda PROTO SHIELD PLUS rende comodo ed immediato sperimentare e...
56,00 € -
Adattatore da SMD a piastra sperimentale (confezione 10pz)
Adatta facilmente componenti SMD a piastra sperimentale (breadboard) con...
3,90 € -
Proto Shield Plus KIT BASE
La scheda PROTOSHIELD PLUS rende comodo ed immediato sperimentare e...
52,00 €
Introducing the new MKR2UNO Plus board
Published : 16/12/2018 16:30:08
Categories : Proto Shield Plus
Introducing the new MKR2UNO Plus board
It is quite annoying that the new Arduino MKR family boards run at 3,3V instad of 5V.
Thus, the maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the boards.
The MKR2UNO Plus provides on-board bidirectional level shifting (5V <-> 3.3V) on each digital pin and clipping voltage at 3.3V on each analog input pin.
The UNO form factor lets you to use it with a lot of standard shileds of wide spread use on the market.
It works with:
- ARDUINO MKR 1000 WIFI
- ARDUINO MKR GSM 1400
- ARDUINO MKR FOX 1200
- ARDUINO MKR WiFi 1010
- ARDUINO MKR Vidor 4000
Related products
Getting the MKR2UNO Plus out of the box
Read more
Published : 24/02/2019 17:18:51
