No products
BLOG NEWS
USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS 
What does Paolo Aliverti say about the IoT Proto Shield Plus? 
USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS 
USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS 
I2C Bus on the IoT Proto Shield Plus Search on blog
Follow us on facebook
Top sellers
-
Proto Shield Plus STARTER KIT
This kit is the ideal solution for those who want to start to prototype...
69,90 € -
Proto Shield Plus LCD KIT
Prototype with ARDUINO / GENUINO boards without having a lot of wires...
56,00 € -
SMD to breadboard adapter (10 pcs pack)
Easily adapt SMD devices to 2.54mm prototyping breadboards.
3,90 € -
Proto Shield Plus BASE KIT
Prototype with ARDUINO / GENUINO boards without having a lot of wires...
52,00 €
Introducing the new MKR2UNO Plus board
Published : 12/16/2018 16:30:08
Categories : Proto Shield Plus
Introducing the new MKR2UNO Plus board
It is quite annoying that the new Arduino MKR family boards run at 3,3V instad of 5V.
Thus, the maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the boards.
The MKR2UNO Plus provides on-board bidirectional level shifting (5V <-> 3.3V) on each digital pin and clipping voltage at 3.3V on each analog input pin.
The UNO form factor lets you to use it with a lot of standard shileds of wide spread use on the market.
It works with:
- ARDUINO MKR 1000 WIFI
- ARDUINO MKR GSM 1400
- ARDUINO MKR FOX 1200
- ARDUINO MKR WiFi 1010
- ARDUINO MKR Vidor 4000
Related products
Getting the MKR2UNO Plus out of the box
Read more
Published : 02/24/2019 17:18:51
