> >

BLOG NEWS

USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS
Do you need to work with the good old 16x2 LCD display? Then just plug it into the IoT Proto Shield Plus and you [...]

What does Paolo Aliverti say about the IoT Proto Shield Plus? What does Paolo Aliverti say about the IoT Proto Shield Plus?
Special thanks to Paolo Aliverti (aka Zeppelinmaker) for reviewing the IoT Proto Shield Plus.

USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a small display in your project, just plug an SSD1306 128x32 OLED display module into the IoT Proto [...]

USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a display in your project, just plug an SSD1306 128x64 OLED display module into the IoT Proto Shield [...]

I2C Bus on the IoT Proto Shield Plus I2C Bus on the IoT Proto Shield Plus
I2C is widely used for attaching peripheral ICs to processors and microcontrollers, let's take a look at this bus [...]

See all

Search on blog

Follow us on facebook

Top sellers

Information

Proto Shield Plus

Prototype with ARDUINO / GENUINO boards without having a lot of wires tangled together all the times.
Swapping from UNO / LEONARDO to NANO, MICRO or MINI is fast and easy.
On-board pusbuttons and LCD header make easy to quickly setup an HMI for your testing environment.

43 articles in the categorie Proto Shield Plus

<< 1 ... 2 3 4 5 6 >>
<< 1 ... 2 3 4 5 6 >>

www.gtronicsshop.com

Payment methods