> >

BLOG NEWS

USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS
Do you need to work with the good old 16x2 LCD display? Then just plug it into the IoT Proto Shield Plus and you [...]

What does Paolo Aliverti say about the IoT Proto Shield Plus? What does Paolo Aliverti say about the IoT Proto Shield Plus?
Special thanks to Paolo Aliverti (aka Zeppelinmaker) for reviewing the IoT Proto Shield Plus.

USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a small display in your project, just plug an SSD1306 128x32 OLED display module into the IoT Proto [...]

USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a display in your project, just plug an SSD1306 128x64 OLED display module into the IoT Proto Shield [...]

I2C Bus on the IoT Proto Shield Plus I2C Bus on the IoT Proto Shield Plus
I2C is widely used for attaching peripheral ICs to processors and microcontrollers, let's take a look at this bus [...]

See all

Search on blog

Follow us on facebook

Top sellers

Information

IoT Proto Shield Plus

The IoT Proto Shield Plus is designed to let you easily prototype with ESP32, ESP8266 and ARDUINO NANO boards.

Swapping from ESP32 to ESP8266 to NANO, is fast and easy.

On-board rotary encoder, touch sensor, potentiometer, LEDs and a wide variety of Plug and Play sockets for the most common additional modules, make easy to quickly setup your testing environment.

16 articles in the categorie IoT Proto Shield Plus

<< 1 2 >>
<< 1 2 >>

www.gtronicsshop.com

Payment methods