No products
Follow us on facebook
This kit is the ideal solution for those who want to start to prototype...
Prototype with ARDUINO / GENUINO boards without having a lot of wires...
Easily adapt SMD devices to 2.54mm prototyping breadboards.
Prototype with ARDUINO / GENUINO boards without having a lot of wires...
Do you need to work with the good old 16x2 LCD display? Then just plug it into the IoT Proto Shield Plus and you are ready to go!
If you need a small display in your project, just plug an SSD1306 128x32 OLED display module into the IoT Proto Shield Plus and you are ready to go!
If you need a display in your project, just plug an SSD1306 128x64 OLED display module into the IoT Proto Shield Plus and you are ready to go!
I2C is widely used for attaching peripheral ICs to processors and microcontrollers, let's take a look at this bus is implemented in the IoT Proto Shield Plus.
When you have mixed 5V and 3V3 signals with 3V3 voltage tolerant devices a level shifter is mandatory to avoid damages. Let's see how to use onboard Level Shifter of the IoT Proto Shield Plus.
The onboard speaker of the IoT Proto Shield Plus can play simple tones or being use like a buzzer, let's take a look at it.